JMR electronic PUB-00281 Manual do Utilizador Página 16
- Página / 33
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Setting ID
Rotary switch settings only affect Slot 0 and all other slots are sequentially
increased by a value of one after that slot.
The ID is set
sequentially starting
from a base address.
The base address, or
starting address, is
set via a 0-7
position rotary
switch located on
the back of the unit.
There is a second 0-
15 position rotary
switch which can be
changed to modify
the base address
setting. Both the top
and bottom
switches must be
set identically.
The default value
for both switches is
0.
The 0-7 switch is used to set the base address which is multiplied by 16, and the
0-15 switch is used to set the offset modifier to the base address. The formula for
setting the ID is: x(16)+y, where x is the 0-7 switch and y is the 0-15 switch.
Example: The 0-7 switch is set to 2, the 0-15 switch is set to 6. This sets the base
address to 38 (2*16=32, +6=38). So Slot 0 ID = 38, Slot 1 ID = 39, Slot 2 ID =
40, Slot 3 ID = 41, etc… up to Slot 14 ID = 52.
The table below provides the Slot 0 Starting (Base) Address Settings.
FORTRA
FORCE
4
G15 & G15+ RAID System Installation Guide Rev A
4-2
0-7 ID Switch
(base address)
0-15 ID Switch
(base modifier)
0-7 ID Switch
(base address)
0-15 ID Switch
(base modifier)
- FFoorrccee 1
- Table of 3
- Contents 3
- 1. Introduction 5
- G15 RAID System Components 6
- G15+ RAID System Components 6
- Rackmount Specifications 6
- Tower Specifications 7
- Fibre Channel Features 7
- ID Selection 8
- 2. Hardware Specification 9
- Thermal Specifications 10
- Fault Indication Features 10
- 3. Device Installation 12
- Drive Installation 13
- 4. Fibre Channel JBOD Setup 15
- Setting ID 16
- Option Settings 17
- 1G Option Setting 17
- ID Conflict 17
- Front Status LEDs 18
- External I/O Connection 19
- SYS Activity LED 20
- 5. Blower Operation 21
- Blower Replacement 22
- 6. Power Supply Operation 23
- Power Supply Replacement 24
- 7. FR15 Cabinet Installation 25
- Rail Mounting Kit Hardware 26
- Spare Hardware Parts 26
- Rail Installation 26
- Extension Bracket 27
- Two #10-32 27
- #10-32 screw on each side 28
- 8. SES Operation 29
- 9. Installing the Intel 30
- PCI RAID Controller 30
- 10. Product Support 31
- Appendix A. D 32
- C ONTROLLER 32
John Lewis JLBIUCL01 manuály
Uživatelské manuály a uživatelské příručky pro Ledničky s mrazničkou John Lewis JLBIUCL01.
Poskytujeme 2 manuály pdf John Lewis JLBIUCL01 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais